FUXTEC FX-MSP2.2 Manual

Original-Bedienungsanleitung FUXTEC FX-MSP2.2_de_en_fr_ita_rev09
33
Fig. 9
1.Chock lever
2.Petrol tap Pos. A: OPEN
Pos. B: TO
3.Air Filter
4. Primary pump
5. Warm start
1) Leave the choke in the OFF position.
2) Set the fuel lever to the ON position.
3) Pull the starter cord 2-3 and release it slowly.
Attention:
1) Do not pull the starter cable beyond the dead center. Otherwise, it may tear or
damage the device.
2)The starter cable is not part of the warranty.
Petrol tap

FUXTEC FX-MSP2.2 Specifications

General

Brand	FUXTEC
Model	FX-MSP2.2
Category	Paint Sprayer
Language	English