FWE PRECISION HEATED TEMPERATURE TECHNOLOGY
SERIAL AND MODEL NUMBER
VERIFY ELECTRICAL REQUIREMENTS
BEFORE PLUGGING UNIT INTO POWER SOURCE.
UPON EQUIPMENT DELIVERY
The serial number and model number are found on the nameplate (serial tag) affixed near the power cord of
the unit. Please record them in this booklet on page 15. When ordering parts and / or service, you will need
to provide this information. The voltage and amperage of the unit are also stamped on the serial tag.
All FWE Models are manufactured to high demanding standards outlined by several agencies known
throughout the industry. Our models are recorded with our Service Department. In the event of any further
questions concerning your unit, please refer to the Model and Serial Numbers found on the name plate
affixed to the unit. It is our pleasure to help assist you in every possible way.
UNPACKING
After uncrating your cabinet, remove all packing materials from inside the cabinet, remove all tape,
zip-ties, and padding which held all doors, shelves, racks, cord, etc., in place during shipment.
NOTE: Serial tag located by electrical cord.
SAMPLE
SAMPLE
5
FWE Food Warming Equipment Company, Inc.
To Next Page
