FXA 501741208 - OPERATION; Starting the engine

- 11 -
Check the cutting height settings, and make any necessary adjustments.
WARNING: The blade can cause serious injury. Stop the engine before adjusting cutting height
5. OPERATION
Starting the engine
z Primer (Only for G46P-B, G46SHL-B)
Incoldcondition,it’snecessarytopushtheprimerbuttonontheairfilterbeforepullingthestarterhandle.
Primer only for cool engine use
You also should put more fuel to mix air for easy start. When you push the primer button, it will pump the
fuel direct from carburetor to burning house.
* Note: Not all models have this PRIMER.
z Move the choke lever to the “CHOKE-position” (Only for model G53SHL-C)
* Note: Not all models have this choke lever.
z Pull back on the brake lever and hold it against the handle.
Temperature
Push time
<0℃
3~4
0℃~10℃
2~3
10℃~20℃
1~2
>20℃
1
CHOKE
PRIMER
BUTTON