FXA DRM24E-D225 - Technical Data

16
6. Technical data
DRM24E-D225
Type engine
four stroke engine/air cooled
Cutting width
61 cm
Cubic capacity
224 cm³
Cutting height
35-75 mm
Rotation speed
3100 min
-1
Weight
120kg
Power
4,4 kW/ 6,0 PS
Driving speed V
1,5; 2,0;4,7;
6,0 km/h
Fuel
Regular grade petrol/lead
free max. 5% bioethanol
Driving speed R
2,4 km/h
Capacity tank
1,8 l
Front wheels
10x400-4
Motor oil
SAE 30 / 10W30
Tyre pressure,
front wheels
1.5bar
Capacity tank/oil
0.5l
Rear wheels
13x500-6
Cutting height
adjustment
5-steps
Tyre pressure,
rear wheels
1.8bar
Grass catcher
box capacity
150 l
Li-ion Battery
Rated voltage
20V
AC input of the
charging unit
100 - 240 V
Minutes
charging time
280min
Battery capacity
2 Ah
Charging
current
0,6 A
Charger model
Subject to technical changes! Information concerning noise emission measured
according to relevant standards: Sound pressure level LPA = 84,7 dB(A) Uncertainty
K =3,0 dB(A) Sound power level LWA = 96,59 dB(A) Uncertainty K = 1,69 dB(A) Wear
ear-muffs. The impact of noise can cause damage to hearing. Vibration ah (left/right)
= 3,662/3,522 m/s2 Vibration level in the seat, ah= 1,261 m/s2 Uncertainty K = 1,5
m/s2 Reduce noise generation and vibration to a minimum!
• Use only equipment that is in perfect condition.
•
Maintain and clean the equipment regularly.
• Adopt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.
Wh
en using the petrol lawn mower for extended periods, vibration-induced circulatory
problems may occur (white finger disease)
We cannot give exact details about the duration of use in this case because it is
different for each individual. The following factors can influence the condition:
• Circulatory problems in the user’s hands