FXA DRM24E-D225 - Adding Engine Oil

19
Flange nut
Steering wheel
Flat washer
Flang Washer
Steering wheel
hub
Decorative tube
bushing
shaft
Nut
bolt
Steering wheel
cover
Lower steering rod
Install Grass-Bag Hang the grass bag to the hook(as figure）
Add engine oil
• Place the mower on a horizontal surface.
• Remove the filler cap. Place the funnel securely and add oil. Do not top off.
• Check dipstick to confirm adequate amount of oil.
• Secure the oil cap and wipe off any excess oil.