21
Insert Battery Open battery cap, then insert battery, close the cap（As figure）
Adjusting the seat
Before operating the riding mower, adjust the seat position to ensure that your feet can
step in the brake pedal and parking pedal firmly.
To move th e se at: Enga gin g th e pa rkin g b r ake
•Turn the key to STOP position and set the parking brake.
• Sit in seat，flip the seat adjustment lever in left orientation.
• While holding the lever, slide the seat to the desired position.
• Release the lever and make sure the seat is lock in position before operating the
mower.
Engaging the parking brake
• Fully depress and hold the brake pedal and depress the parking brake at the same
time. Or firstly depress the parking brake, then fully depress the brake pedal.
• Release the brake pedal.
• Release the parking pedal.
• Turn off the machine and take out the key.
• If you need to unlock the parking brake, depress the brake pedal forcefully and hear
a "click" or the parking brake pedal bounces, indicating that the unlocking is successful.
Note: The mower starts, the brake in lock state, blade not working, the engine will not
shut down when person leaves the seat. In any other case, once person leaves the
seat, the engine shut down.
To Next Page
Loading...
