SL 2000 Circuit Board Trim Pot Locations
and Adjustments
CAUTION
High Speed Timer Trim Pot
Motor FORCE Trim Pot
Adjusng the Trim Pots.
The trim pots are thoroughly tested and checked aer manufacture and
during assembly and nal tesng of the gate motor.
Extreme care should be taken when adjusng the trim pots. They DO NOT
rotate 360 degrees (in a full circle). Ensure the correct sized screwdriver is
used and all adjustments are done slowly and carefully. Excessive force will
damage the trim pot and render the board inoperable. Trim pots damaged by
excessive force are not covered by warranty and the circuit board will need
to be returned for repair.
SL GATE MOTOR INSTALLATION
AND SET UP INSTRUCTIONS