TROUBLESHOOTING
PORTABLE WIRELESS SPEAKER
G-GRIPG-GRIP
Solution
Lower the volume on your G-GRIP and/or audio source
Turn up the volume on your G-GRIP and/or audio source
Recharge the batteries using the included Power Adapter
If using Bluetooth, move the audio source and G-GRIP closer together
(within the 30’ range)
Unpair G-GRIP from your Bluetooth device (check with your device
manufacturer for more information about Bluetooth pairing), then re-pair
following the steps in the section BLUETOOTH OPERATION
Conrm your device is A2DP Bluetooth compatible. Ensure that both your
Bluetooth device and G-GRIP are not connected to any other devices
If your G-GRIP is connected to a Line In source, the Bluetooth will not
function. Unplug the 3.5mm Line In cable and press the Pair Button to
switch to Bluetooth
Unpair G-GRIP from your Bluetooth device (check with your device
manufacturer for more information about Bluetooth pairing), then re-pair
following the steps in the section BLUETOOTH OPERATION
Issue
Distortion
Not loud enough
Intermittent sound
Cannot play audio
via Bluetooth
To Next Page
Loading...