G4M KB-ii - Control Panel Functions

7
1. VOLUME
Adjusts the master volume
2. LCD DISPLAY
Displays all information related to current operation
3. POWER SWITCH
Turns the power on or o
4. SHIFT
Hold down to access secondary functions of other buttons
5. TEMPO+ & TEMPO- / ACCOMP+ & ACCOMP-
Adjusts the current tempo.
With [Shift] pressed adjusts the accompaniment volume.
6. METRONOME
Turns the metronome on or o
7. SONG / ALBUM
Enables Song mode.
With [Shift] pressed, turns the album function on or o
8. STYLE / DICT
Enables style mode.
With [Shift] pressed turns the chord dictionary function on or o.
9. VOICE
Enables Voice mode
10. PIANO
Turns the piano mode on or o
11. INTELLIGENT LEARNING
Turns the Intelligent Learning function on or o
12. PLAY / STOP
In Style Mode = Starts or stops playing the style
In Song Mode = Starts or stops playing the song
13. PAUSE / SYNCH START
In Style Mode = Turns the Sync/Start function on or o
In Song Mode = Pauses or continues playing the song
14. LOOP / INTRO / ENDING
In Style Mode = Plays the intro or ending pattern
In Song Mode = Sets the beginning and end of a song loop section
15. REWIND / FILL A
In Style Mode = Plays fill pattern A
In Song Mode = Rewinds the song
16. FAST FORWARD / FILL B
In Style Mode = Plays fill pattern B
In Song Mode = Fast Forwards the song
17. FADE
Turns the Fade In/Out function on or o
18. CHORD
Enters the Chord mode
19. BANK / RECORD
Switches between Memory Banks
With [Shift] pressed, enters record mode
20. STORE / ACCOMP
Saves the current panel settings
With [Shift] pressed selects the accompaniment track to record
21- 26. M1 - M6
Recalls the saved panel settings
(When using One Touch Setting mode, only M1-M4 are available)
26. TOUCH
With [Shift] pressed, sets the desired touch sensitivity level.
21- 25. Melody 1 - 5
With [Shift] pressed selects melody tracks 1-5 to record
27. O.T.S / PERFORM
Turns the One Touch Setting function on or o.
With [Shift] pressed turns the Performance Assistance function on
or o
28. DATA WHEEL
Adjusts the parameter values
29. NUMBER KEYPAD
Sets parameter values or enters number selections
30. OCTAVE
Enters the Octave menu
With [Shift] pressed, enters DEMO mode
31. TRANSPOSE / DSP
Enters the Transpose menu
With [Shift] pressed, turns the DSP function on or o
32. DUAL / EQ
Turns the dual function on or o
With [Shift] pressed, enters the EQ menu
33. LOWER
Turns the Lower function on or o
34. HARMONY / MIXER
Turns the harmony eect on or o
With [Shift] pressed, enters the mixer menu
35. SUSTAIN / FUNCTION
Turns the Sustain function on or o
With [Shift] pressed, this enters the function menu
36. PITCH BEND WHEEL
Raises or lowers the pitch of the notes being played.
Overview