GABBY ALEXANDRA - Attach Anti-Tip Safety Hardware

Attach the Brackets (III) horizontally to the top of the back of the Dresser using the Small Screws (I).
Screw the remaining Brackets (III) vertically 1 inch below the brackets attached to the Dresser using
the large screws (II). The Large Screws (B) should be screwed into a stud in the wall. Align the
Brackets vertically and string in the Retention Belt (IV). Confirm Strap is securely laced and locked.
Page 3 of 3
STEP 3
IV
III
II
I
Wall
Page 2 of 3