GAC gs3 - Page 23

19
OPERATION
●
INTERIOR INSPECTION
Inspecting brake pedal
Start the engine, depress the brake pedal
rmly, and then check the distance between
the pedal and the oor.
When you depress the brake pedal, if you
feel that the brake pedal is spongy or soft, it
may be caused by the air in the brake system
or the system leakage, which may lead to the
system functional failure. In that case, please
contact the GAC Motor authorized shop in
time for inspection.
Inspection of EPB
Pull up the EPB button to apply the EPB
and verify the parking state through the red
indicator lamp on the button and the EPB
status indicator lamp on the instrument
cluster.
Inspecting windshield washer
Run the windshield washer to check whether
the windshield washer fluid is sprayed
normally.
Inspecting windshield wiper
Toggle the wiper combination switch to run
the wiper so as to inspect the operation of
wiper at high speed and low speed for any
abnormality.