EasyManua.ls Logo

Gaggia Syncrony Logic - Control Panel Pilot Lights

Gaggia Syncrony Logic
92 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
CONTROL PANEL PILOT LIGHTS
14 CONTROL PANEL PILOT LIGHTS
Warning Causes Remedies
Green light (29)
Machine on
Green light (24) remains lit
Machine at temperature, ready:
- to dispense coffee
- to dispense hot water
Green light (24) flashing
Machine heating to dispense coffee
and hot water
The machine is dispensing
coffee.
Green light (26) remains lit
Machine dispensing with ground
coffee
Green light (28) remains lit
Machine at temperature, ready to
dispense steam
Green light (28) flashing
Machine heating to dispense
steam
Green light (24) flashing
Green light (28) flashing
simultaneously
Machine overheated; the machine
cannot dispense coffee in this
condition.
You must drain water into the drip
tray by turning the Steam knob (17)
until the green temperature ready
light (24) remains steadily lit and
the green light (28) goes off.
Green light (24) flashing
Green light (26) flashing
Green light (28) flashing
simultaneously
The machine has dispensed the
max. quantity of water programmed
per operation.
Turn the hot water/steam knob
clockwise. If you want more
water, turn the knob anticlockwise
again.
Red light (21) remains lit
Not enough water in the container. Fill the container with fresh drinking
water, load the circuit and start the
procedure over again.
Coffee container empty. Fill the container with coffee beans
and start the procedure over
again.
Red light (21) flashing
Dispensing unit, dregs box, drip
tray, front door not correctly posi-
tioned to allow the machine to
function.
To shut off the red light, make sure
that all parts have been correctly
fitted in place or closed.

Table of Contents

Other manuals for Gaggia Syncrony Logic

Related product manuals