What to do if my Gaggia TITANIUM Espresso Machine Coffee Maker is not dispensing coffee?
If your Gaggia Coffee Maker is not dispensing coffee, the issue might be a dirty coffee dispenser, so try cleaning it. Alternatively, you might be using too large of a dose; try decreasing the dose.
Why is my Gaggia TITANIUM Espresso Machine dispensing coffee so slowly?
If your Gaggia Coffee Maker dispenses coffee too slowly, it could be due to a couple of reasons. First, the coffee might be too fine; consider changing the coffee blend or adjusting the grinding. Second, the coffee dispenser might be dirty; try cleaning it.
Why does coffee come out too quickly from my Gaggia Coffee Maker?
If coffee comes out too quickly from your Gaggia Coffee Maker, it could be due to a few reasons. You might not be using enough coffee; ensure the container is filled with ground coffee (not instant coffee). The coffee blend might be too coarse; try changing the type of blend. You might also be using too small of a dose; try increasing the dose.
Why is coffee dispensed outside the dispenser on my Gaggia TITANIUM Espresso Machine Coffee Maker?
If your Gaggia Coffee Maker is dispensing coffee outside of the dispenser, it could be due to two reasons. First, the coffee dispenser might not be fitted correctly; try refitting it. Second, the coffee dispenser could be clogged; in this case, clean the coffee dispenser and its spouts.
Why does my Gaggia TITANIUM Espresso Machine Coffee Maker take too long to heat up?
If your Gaggia Coffee Maker takes too long to heat up or dispenses a limited volume of water, the appliance circuit may be clogged by scaling. Descale the appliance to resolve this issue.
Why does the coffee from my Gaggia TITANIUM Espresso Machine Coffee Maker have little crema?
If your Gaggia Coffee Maker's coffee has little 'crema', it could be due to a few reasons. The coffee blend might not be suitable, the coffee might not be freshly ground, or it might be ground too coarsely. Try changing the coffee blend or adjusting the grinding. You might also need to increase the dose.
What to do if the coffee dispenser on my Gaggia TITANIUM Espresso Machine Coffee Maker is jammed?
If your Gaggia Coffee Maker's coffee dispenser is jammed, it could be because the coffee dispenser is not snapped into its housing. Switch the appliance ON and close the service cover to automatically return the coffee dispenser to its initial position. Another reason could be that the coffee grounds drawer is in place. Remove the coffee grounds drawer before removing the coffee dispenser.
Why is there no hot water or steam from my Gaggia TITANIUM Espresso Machine?
If your Gaggia Coffee Maker is not providing hot water or steam, the hole of the steam nozzle may be clogged. Clean the steam nozzle hole with a pin.
Why is the coffee from my Gaggia TITANIUM Espresso Machine Coffee Maker too cold?
If the coffee from your Gaggia Coffee Maker is too cold, it might be because the cups are cold. Try heating the cups before dispensing coffee.
General| Type | Espresso Machine |
|---|---|
| Model | TITANIUM |
| Brand | Gaggia |
| Pump Pressure | 15 bar |
| Material | Stainless Steel |
| Display | LCD |
| Steam Wand | Yes |
| Grinder | Ceramic |
| Frothing System | Pannarello |
| Housing Material | Plastic and Stainless Steel |
General warnings and precautions for appliance use and servicing.
Guidelines for using the power supply cord safely to prevent risks.
Information on understanding and using the instruction manual.
Advice on keeping and referring to the instruction manual.
Guidelines on proper use, power, and preventing injuries.
Instructions for setting up, cleaning, and storing the appliance.
Procedures for repair, maintenance, and fire fighting.
Identification and function of control panel buttons and display.
Unpacking and initial setup steps for the coffee maker.
Steps to ready the machine for its first operation.
Instructions for brewing coffee using whole beans.
Steps for attaching and using the cappuccinatore.
Using the MENU/OK button for programming.
Navigating and selecting programmable functions.
Function to reduce energy consumption.
Automatic internal rinsing function.
Setting the display language.
Adjusting settings based on water hardness.
Activating the cup warming plate.
Adjusting the brewing water temperature.
Enhancing coffee aroma via pre-brewing.
Grinding coffee twice for enhanced flavor.
Displaying the total number of coffees brewed.
Setting automatic on/off times for energy saving.
Setting and displaying the current time.
Initiating a wash cycle for internal parts.
Restoring the machine to its original default settings.
Guides for interpreting display messages and alarms.
To Next Page