Gaggia Velasca - Setting the water hardness; Using the machine; Brewing coffee with beans; Brewing coffee with pre-ground coffee

11
English
3 Check how many squares have changed into the red color and
check the water hardness in below table.
numbers of red squares value to be set water hardness
1 1 very soft water
2 2 soft water
3 3 hard water
4 4 very hard water
Setting the water hardness
1 To set the water hardness, press the MENU button, select menu
and scroll to select water hardness.
2 Press the OK button and select the water hardness in your area.
3 Press the OK button to conrm.
4 Press the ESC button to return to the main menu.
Using the machine
Brewing coee with beans
1 Adjust the coee dispensing spout to suit the size of your cup.
2 Press the AROMA STRENGTH button to select the desired
coee strength from 1-5 beans.
3 Press the ESPRESSO button to brew an espresso or press the
ESPRESSO LUNGO button to brew a coee.
Brewing coee with pre-ground coee
When you brew coee with pre-ground coee, use the measuring
scoop in the multifunctional tool supplied to put the correct dose in
the pre-ground coee compartment. If you add more pre-ground
coee, the excess coee will end up in the coee grounds drawer.
1 Open the lid of the pre-ground coee compartment.
1
2
3
4
4219_460_3728_1_booklet_A5_v2.indd 11 14/02/17 08:49