Gaggia Velasca - Cleaning and maintenance; Weekly cleaning of the brew group

15
English
Cleaning and maintenance
Weekly cleaning of the brew group
Clean the brew group once per week.
1 Remove the coee grounds container and open the service
door.
2 Remove the coee residues drawer.
3 To remove the brew group, press the lever and pull the brew
group out of the machine.
4 Rinse the brew group with fresh water and let it air dry.
5 To place the brew group back, make sure that the lever is in
contact with the base of the brewing unit.
Note: If it is not in contact with the base, push it down.
6 Make sure the locking hook of the brew group is in the correct
position. To position the hook correctly, push it upwards until it
is in uppermost position.
1
2
4219_460_3728_1_booklet_A5_v2.indd 15 14/02/17 08:49