Gaggia Velasca - Meaning of error codes

19
English
Meaning of error codes
Error code Problem Cause Possible solution
1 Coee grinder blocked Coee exit duct clogged Clean the coee exit
duct thoroughly with
the handle of the
multifunctional tool or a
spoon handle.
3 - 4 The brew group cannot
be removed.
The brew group is not
positioned correctly.
Close the maintenance
door. Switch the
machine o and back
on again. Wait for the
‘machine ready’ icon
on the display and then
remove the brew group.
5 Water circuit problem There is air in the water
circuit.
Remove and place
back the water tank a
couple of times. Make
sure you insert it into
the machine properly.
Check if the water tank
compartment is clean.
Other error codes Switch the machine o
and switch it back on
again after 30 seconds.
Try this 2 or 3 times.
If the above solutions do not help to remove the error code icon
from the display and bring the machine back to normal working
order, contact the Gaggia hotline. Contact details can be found in
the warranty booklet or or visit
www.gaggia.com/n-m-co/espresso/world-wide or
www.gaggia.it/n-m-co/espresso/contact.
4219_460_3728_1_booklet_A5_v2.indd 19 14/02/17 08:49