Need help?Do you have a question about the GAI-Tronics Titan and is the answer not in the manual?
General| Brand | GAI-Tronics |
|---|---|
| Model | Titan |
| Category | IP Phone |
| Language | English |
General advice on cable routing, gland selection, and ensuring a weatherproof seal during telephone mounting.
Specific mounting details for the Titan model, including wall and pole mounting kits and associated hardware.
Instructions for wall mounting the Titan telephone, including hole preparation and screw selection for a watertight seal.
Details on pole mounting the Titan telephone using a specific kit, including strap requirements and torque settings.
Guidance for flush mounting Titan telephones, including recess preparation and faceplate dimensions.
Information on mounting the Commander telephone, covering wall, pole, and desk mounting options.
Instructions for wall mounting the Commander telephone, emphasizing weatherproof integrity and cable entry.
Details the pole mounting procedure for Commander telephones using a specific kit and banding straps.
Instructions for desk mounting the Commander telephone, including rotating the front casing for optimal cable entry.
Explains that VR and Help Point products share identical mounting and installation procedures.
Describes wall/pole mounting for VR/Help Point units, referring to Titan enclosure information.
Details the flush mounting process for VR and Help Point telephones, including recess preparation.
General IMPORTANT safety advice for connecting and installing the product, focusing on hazardous voltages and seals.
Critical safety information regarding hazardous voltages, cable specifications, circuit protection, and insulation.
Warning about the telephone's ability to call emergency services and the need for network administrator confirmation.
Step-by-step installation guide for the Titan telephone, including faceplate removal, mounting, and testing.
Diagrams and instructions for making connections to the Titan telephone, including power, network, and serial ports.
Instructions for installing the Commander telephone, covering preparation, mounting, cabling, and reassembly.
Diagrams and details for connecting the Commander telephone, showing input/output, power, ringer, and network connections.
Guidance for installing VR and Help Point telephones, covering faceplate removal, mounting, and cabling.
Details on connecting VR and Help Point telephones, referring to Titan connection details and specific power requirements.
To Next Page