Gaiam STAY-N-PLAY User Manual

Setup, Usage Tips, and Care & Safety Guide
Please read before setting up or using your Stay-N-Play Ball.
TOOLS NEEDED
1. Stay-N-Play Ball pump (you may want to use a bicycle pump or compressor for
initial inflation).
SETUP
1. Remove Stay-N-Play Ball from box and check for shipping damage. (Note: it is
normal for balls to have slight creases or fold marks when first inflated.)
2. Allow ball to reach room temperature before inflating.
3. Insert tip of pump into hole in Stay-N-Play Ball. Inflate ball to the desired height and
firmness. DO NOT overinflate.
4. Remove pump from ball and immediately insert plug into hole (so head is flush with
surface of ball). DO NOT overinflate.
5. Your Stay-N-Play Ball is now ready for use.
STAY-N-PLAY BALL
• Inflate ball and plug.
• Ball may not inflate to 100% of
size on initial inflation.
• Wait 24 hrs.
• Deflate 50% and inflate again.
• Due to the ball’s material, the ball
will increase to proper size with
second inflation.
INFLATION NOTICE
Recommended for children ages 5 - 8
ranging in heights from 42” - 51”.
RECOMMENDATION
05-61652_GA_KIDS_STAYNPLAY_CARE.indd 1 12/22/15 11:17 AM

Gaiam STAY-N-PLAY Specifications

General

Category	Fitness Equipment
Type	Balance Ball
Material	PVC
Included Accessories	Air pump
Product Name	Gaiam STAY-N-PLAY Ball
Features	Anti-burst
Recommended Use	Exercise
Diameter	55 cm

Summary

Tools Needed

Setup

Inflation Notice

Important notes regarding ball inflation, including initial inflation limitations and deflation/re-inflation.

Recommendation

Usage recommendation for children's age and height range.

Important Safety Cautions

Care