To Next PageTo Next Page
Need help?Do you have a question about the gako unguator EMP and is the answer not in the manual?
General| Brand | gako unguator |
|---|---|
| Model | EMP |
| Category | Laboratory Equipment |
| Language | English |
Instructions for online registration using serial number and PIN.
Steps for attaching the mixing unit to the lift arm.
Details on GMP suitability, automatic lift, and quick-lock coupling.
Covers larger volumes, bottle stirring, and advanced programs.
Details on Standard Mixing Blade (SMB) and Disposable Blade (Disp. Blade).
Jar design for contamination-free preparation and quality assurance.
Adapter for precise 0.5 ml dosing of pastes, gels, and creams.
Step-by-step guide for filling and extracting compound with the ExactDose adapter.
Steps for registering the device online and entering the unlock PIN.
Instructions for filling the jar and initiating the test sequence.
Understanding 'OK'/'not OK' results and contacting support.
Transition from IQ test to OQ request and skipping IQ mode.
Purpose and procedure for performing OQ tests after 1000 preparations.
Overview of touch panel for starting compounding operations.
Adjusting parameters via touch panel for optimal compounding.
Steps to move the lift arm and start the mixing process.
Procedure to stop a mixing process and its confirmation.
How to set and adjust mixing parameters based on jar size and formulation.
Detailed steps for securely attaching the mixing unit to the lift arm.
How pre-grinding aids suspension preparation and ensures homogeneity.
Instructions for incorporating active substances with low content.
Guidance for higher solid content suspensions, including warming.
Incorporating liquid components into hydrophilic foundations.
Handling melted foundations and cooling parameters for Emulsion+.
Procedure for mixing gelling agents into fluids or semi-solids.
Troubleshooting steps for stirrer detachment, blocking, and size mismatch.
Addressing issues with incompatible, damaged, or improperly penetrating stirrers.
Details on warranty period, coverage, exclusions, and claim procedures.
Essential safety rules regarding electrical connections, environment, and handling.
Checking displays, attaching test units, and initiating IQ-Mode.
Ensuring proper setup, power, display, and mode functionality.
