Doc. No.: MOVFR Hand Swap.doc 1
G.A.L. Manufacturing Corporation
50 East 153
rd
Street, Bronx, N.Y. 10451
Phone (718) 292-9000 Fax (718) 292-2034 10/5/2005
MOVFR Operator Hand Swap Procedure
This document should be used as a guide to convert a side slide operator to its opposite hand. The following will show
the steps necessary to complete this task. It should take approximately 1 to 1 1/2 hours to complete. Take note of the
entire operator assembly and location of components to avoid reassembly problems.
To Next Page
Need help?
General
