To Next PageTo Next Page
Need help?Do you have a question about the GAL MOVFR and is the answer not in the manual?
General| Brand | GAL |
|---|---|
| Model | MOVFR |
| Category | Door Opening System |
| Language | English |
Procedures for removing specific door components before adjustment.
Instructions for setting the release roller and clutch mechanism for proper operation.
Setting crank arm and clutch link positions when the door is fully closed.
Setting crank arm and clutch link positions when the door is fully open.
Guidance on adjusting the stop roller for proper door alignment.
Steps to adjust the release roller and clutch for center parting doors.
Setting crank arm and clutch link positions for closed center parting doors.
Setting crank arm and clutch link positions for open center parting doors.
General description of the MOVFR 230VAC door operator and its components.
Details on switches, LEDs, and the parameter unit for operator adjustment.
Explanation of the parameter unit's functions, navigation, and capabilities.
Detailed guide for adjusting various operational parameters for the drive.
List of fault codes, their descriptions, and reset procedures.
Step-by-step instructions for replacing the drive unit.
