OPERATION INSTRUCTIONS
OPERATION INSTRUCTIONS
22
Auto Program: How to Cook 8oz fresh vegetables with
sensor.
Accessory Guide: Glass Turntable
For sensor cook function, you can select the type of food you
want to cook from the programs listed on the cooking label
located on the interior panel of the appliance.
Sensor Cook
3
Press START once to start cooking.
2
Press + / - to select food code ‘SC-4’
(Fresh Vegetable).
1
In standby mode, press the SENSOR
COOK once.
Sensor Cook Food Chart (Auto Program)：
Code Food
Weight
SC-6
Potato
5 oz - 16 oz
SC-1
Oatmeal
6 oz - 24 oz
SC-3 Fish 7 oz - 21 oz
SC-4 Fresh Vegetable 7 oz - 21 oz
SC-2 Corn On The Cob 1 - 4 servings
SC-5 Ground Meat 5 oz - 24 oz
or
NOTE:
After cooking for a period of time, the system will detect
whether there is error, if there is error, for example, the sensor
short circuit or open circuit, the system will stop automatically
with the display showing "Er60", beeps sound until press
STOP/CANCEL pad.
If there is no error, the system will judge corresponding cooking
time based on the steam generated by the food, after cooking
for a period of time, the countdown will display on the screen.
During sensor cooking program, if press STOP/CANCEL pad
once or open the door, the system will turn back to standby
mode.
If during the longest sensor time the oven cannot judge the
cooking time according the steam produced by food in the
cavity, the cooking will auto-end.
To Next Page
Loading...
