Need help?Do you have a question about the Galaxy Audio CM-130 and is the answer not in the manual?
General| Brand | Galaxy Audio |
|---|---|
| Model | CM-130 |
| Category | Accessories |
| Language | English |
Specifies altitude and humidity limits for safe operation.
Instructions for cleaning and servicing the meter.
Explanation of safety symbols and servicing parts.
The operational frequency band of the meter.
The range of sound pressure levels the meter can measure.
Options for A and C weighting for sound measurements.
Type of microphone used in the sound level meter.
Details about the meter's digital display and resolution.
FAST and SLOW response times for measurements.
The different decibel ranges the meter can select.
Meter accuracy, dynamic range, and alarm indications.
Function to retain the maximum measured value.
Type of battery required for operation.
Power life, operating and storage temperature/humidity.
Device dimensions, weight, and included accessories.
Description of the 1/2 inch Electret Condenser microphone.
Explanation of meter display indicators and readouts.
Details on power, MAX hold, frequency, and time weighting selection buttons.
Explanation of level range selection and calibration adjustments.
How to access the battery compartment.
Instructions for installing and replacing the 9V battery.
Recommendation to calibrate if the instrument has been unused.
Guidance on avoiding high temperature, humidity, and vibration.
Advice on storing the instrument in a low humidity environment.
Installing battery, turning on, and selecting response time/weighting.
Holding the instrument and pointing the microphone at the noise source.
How the MAX function captures and holds maximum noise values.
Turning off the instrument and removing the battery when not in use.
To Next Page