Galaxy Control Systems 635 Series User Manual

Page 1 of 5
System Galaxy Installation Worksheet
This is a prep-list of information you must know and have before you install any hardware or software on a system.
Minimum OS Requirements (Event Server)
•
Microsoft Windows 10 Pro/or Higher (not Home Edition); with current Microsoft Updates installed.
• You must have administrator rights in order to install SG software.
PC/Event Server Network Settings (
TCP/IP)
The 635-model controllers will connect to the GCS Event Service. You must have a static IP address for this PC.
PC
/Event Server Name:
(computer name only)
IP Address:
.
.
.
this is the IP Address for Event Server-1 ( ipconfig )
Subnet:
.
.
.
Gateway:
.
.
.
Network Settings for 635-Controller Panels (TCP/IP):
Controller #1

Controller #2

Controller #3

Controller #4

IP Address
. . .
. . .
. . .
. . .
Subnet
. . .
. . .
. . .
. . .
Gateway
. . .
. . .
. . .
. . .
Cluster ID
Panel Unit ID
1
CPU Number
Event Server 1
Physical Locale
(1) Controllers (Panel Units) can be on the same cluster or on a separate cluster. Each controller must have a unique Unit ID within the same Cluster.
Equipment & Materials:
• System Galaxy Order Information form - required to complete the registration.
You should keep a copy of this inside the controller for future reference.
• Galaxy Software Installation USB Drive (Galaxy USB) – this includes drivers, utilities, and tools.
• Laptop – for programming and diagnostics.
• Multimeter
• Installation Tools
• Configuration Tool and compatible cable: for configuring the boards:
Programming Tool
Comm Cable
Connection Options
 Web Configuration Tool
(install WCT*)
Cat5e cable
• Connect Laptop to CPU at the on-board LAN Port.
Laptop & CPU must be on same network segment.
* Path to find Web Config Tool

Galaxy Install USB:X\\Utilities\Galaxy_635_Web_Server_V107.exe
 Terminal Emulator Tool
(install TeraTerm **)
RS-232
Serial cable
• Connect to the CPU at the on-board RS-232 Comm Port.
• If needed, use a USB to RS232 Serial Converter cable PN 81-1015-00
** Path to find Terminal Emulator

Galaxy Install USB:X\\Auxiliary\System Galaxy\FTS635\Factory Test\Teraterm\teraterm-4.87.exe

Galaxy Control Systems 635 Series Specifications

General

Inputs	Up to 64
Outputs	Up to 32
Card Format	26-bit Wiegand
Communication	RS-485, TCP/IP
Power	12VDC
Input Voltage	12VDC
Humidity Range	5 to 95% non-condensing

Summary

Minimum OS Requirements for Event Server

PC and Event Server Network Settings

Network Settings for 635-Controller Panels

Equipment and Materials for Installation

Configuration Tools and Cables

System Galaxy Software Installation

Verifying PC Prerequisites

Confirms essential system readiness, including OS updates and administrator rights, before software installation.

Software Installation Steps

Details the sequence for installing System Galaxy software, including prerequisites, database, and core application.

System Online Registration

Guides through the process of registering the System Galaxy software online with customer and license key details.

635-series Hardware Installation

Hardware Installation Steps

Provides step-by-step instructions for physically mounting controllers and connecting components safely and correctly.

Connecting CPU and Network Settings

Details connecting the CPU board via serial or web tools and configuring its network parameters from the worksheet.

Installing and Verifying DRM Boards

Explains how to install DRM boards, set unique addresses, connect cables, and verify they come online.

Verifying Controller Connection and CPU Flash

Verifying GCS Event Service Connection

Ensures the 635-Controller is connected to the GCS Event Service using the Service Monitor application.

Updating CPU Flash Version

Covers updating the CPU board's firmware via its web page or the GCS Loader Utility for compatibility.

Connecting Reader and Other Peripherals

Connecting Reader Wiring to DRM Board

Details how to connect Wiegand reader wiring, including power and data lines, to the DRM board terminals.

Connecting Lock, Door Contacts, and REX

Specifies wiring for door locks, contacts, and Request-to-Exit devices, including cable types and distances.

Jumpering Unused Contacts

Instructs on jumpering unused contacts on DRM and CPU boards to prevent unintended behavior.

Adding Cluster and Controller Information

Describes adding controller and daughterboard information into the System Galaxy software programming screens.