Why is my Galaxy Equipment 177GMIX10 motor overheating and the speed decreasing?
The motor might be overheating and the speed decreasing because the voltage is insufficient, or the speed setting is incorrect. Check the voltage supply and consider using a lower speed setting on your Galaxy Equipment Mixer.
What to do if my Galaxy Equipment Mixer is making noise and overheating?
If your Galaxy Equipment Mixer is making unusual noises and overheating, it may be due to poor lubrication. Try adding or changing the lubrication to resolve this issue.
Why is my Galaxy Equipment Mixer touching the bowl?
If the mixer touches the bowl, it could be that either the mixing device or the bowl has become deformed. You should repair or replace the bowl or the mixing device.
What to do if axles can’t work when operating Galaxy Equipment Mixer?
If the axles aren’t working, it might be due to poor contact of the electrical equipment. Check the plug to ensure it is properly connected.
Why is it difficult to move the bowl up and down on my Galaxy Equipment Mixer?
If it's difficult to move the bowl up and down, the slideway may be rusted. Clean the slideway and lubricate it to improve movement.
What to do if the mixing bowl is out of position in Galaxy Equipment 177GMIX10?
If the mixing bowl is out of position, the moving direction might not be correct. Change the moving direction to correct the bowl's position.
Why Galaxy Equipment Mixer leaks oil?
If your mixer is leaking oil, the sealing washer may be damaged. Replace the sealing washer.
General| Brand | Galaxy Equipment |
|---|---|
| Model | 177GMIX10 |
| Category | Mixer |
| Language | English |
To Next Page