To Next Page
U
uhaysJul 31, 2025
What to do if my Galaxy Equipment 177IMBL7 Blender does not turn on?
- CChristina CannonJul 31, 2025
If your Galaxy Equipment Blender isn't turning on, there are several potential reasons: * **Unplugged:** Ensure the blender is properly plugged into a working wall socket. * **Damaged Power Cord:** A damaged power cord could be the culprit; consider replacing it. * **Disconnected Drive Shaft:** Unplug the immersion blender and check if the shaft is properly screwed into the motor base. Remove the bell and manually test the rotation of the drive shaft end. * **Blade Obstruction:** Unplug the immersion blender and carefully inspect the blade area for any obstructions. Manually rotate the blades to check for free movement.
General