This diagram is only for 60Hz 120VAC. Verify line in voltage before connecting. If you are not sure of the operation
and/or installation of this unit, contact an electrician or contact our office. Galaxy Unlimited, LLC is not responsible for
incorrect field wiring, damages to equipment or harm to anyone or anything. Incorrect field wiring will void warranty.
Important:
If the voltage on site does not match the voltage indicated in the Control box door, please call our technical support
team to receive further instructions.
Phone: 888-317-7203
Inside Motor Wiring:
Black: T1, T3
Orange: T2, T4
Red: T5
White: T8
Inside Control Box Motor Wiring:
Orange: Motor Orange
Red: Motor Red
Black: Motor Black
Green: Tied together with Transformer green and Power green.
White: Tied together with the white wire coming from the bottom of the down contactor.
*If your motor is causing your cables to spool backwards on the winder, swap Motor Black and Motor Orange to
reverse the rotation of the motor.
Power Disconnect Wiring:
Black: L1
White L2
Green: Tied together with Transformer green and Motor Green
To Next Page
Loading...