How to fix a Galaxy EC-555 Massager that is not working?
If your Galaxy Massager doesn't work, it might not be properly plugged in. Ensure that the voltage specified on the product matches your local mains voltage. Then, plug it in again, making sure the outlet is functioning correctly.
What to do if my Galaxy EC-555 Massager stopped working?
If your Galaxy Massager stops working, it may have automatically switched to standby mode after completing its auto timer session. To start another session, simply press the Power button again.
Why did my Galaxy EC-555 Massager stop working suddenly?
If your Galaxy Massager suddenly stopped working, it's possible the overheat protection has been activated after 45 minutes of continuous use. Unplug the device and allow it to cool down for 60 minutes before using it again.
What to do if Galaxy EC-555 does not work after applying load?
If your Galaxy Massager is not working, it could be due to excessive load. Reduce the load being applied to the product and then try starting it again.
Why is my Galaxy EC-555 abnormally warm?
If your Galaxy Massager is abnormally warm, it's likely being overused. Unplug the device and allow it to cool down completely before using it again.
Why can noise be heard from the Galaxy EC-555 Massager?
The noise you hear from your Galaxy Massager is normal, as it is produced by the mechanical parts. This does not indicate a fault with the product.
Instructions on safe cleaning methods, advising against abrasive agents and water.
Recommendations for storing the chair away from sunlight, heat, and heavy objects.
To Next Page
General