Via Centallo, 136 - Centallo (CN) – ITALY
Tel 0171.718005 Fax 0171.718004
Operator’s and Maintenance Manual – Rotary Disc Mowers
43
6.1 LUBRICATION OF MECHANICAL COMPONENTS
Before operation and every 8 hours of work, lubricate all bearings, pins
and the telescopic rod of the cardan joint using quality grease.
When the mower is not used for a longer period, clean and grease the drive
shaft.
In winter and when temperature is very low grease pipes to protect plastics.
Clean debris from the lubricators heads before injecting
lubricating grease.
Grease following point with lithium grease:
6.1.1
L
UBRICATION
M
OD
.
FR/D
The model FR/D has 3 points to be greased:
Mod. FR/D
To Next Page
Loading...
Need help?
General
