Gallagher Fence Control - Page 11

GE - Fence Control
- V1.1
11
Congure or query the fence voltage warning threshold
Parameter descripon
<VALUE> ... Integer between 1000 and 8000
(oponal) (standard 2000)
Without parameters
Querying the current warning thresholds for fence and
power supply voltage
alert threshold <VALUE>
If the fence voltage falls below the set value <VALUE> in volts, the Fence Control sends an alarm to all
phone numbers in the phone book, in sequence, at a 5-minute interval.
Congure delivery warning threshold
Parameter descripon
<VALUE> ... Decimal number between 7.0 and 12.0 or
Keyword "o" (default 10.0)
alert threshold bat <VALUE>
If the supply voltage falls below the set <EVALUE> in volts,
the Fence Control sends an alarm to the administrator.
Fence Control meadow: Alert
threshold
fence: 4000V Power supply: 9.0V
Fence Control meadow: Alert
threshold
Fencing: 4000V
Power supply: 10.0V
warning threshold <VALUE>
Warning threshold 4000
warning threshold bat <VALUE>
Warning threshold bat 9.0