SMS commands - Informaon
Status request
Status query for all Fence Control parameters.
The parameters include:
• Name of the Fence Control
• Condion of the energizer
• Measured fence voltage on the energizer
• Measured supply voltage
• Status of the external output
• Mobile radio parameters
- Selected network (GSM or LTE-M)
- Signal strength in %
• Measured temperature inside the Fence control
The temperature measured in the Fence Control may dier greatly from the ambient
temperature on site and should therefore not be used to determine the outside
temperature.
List of subscribed telephone numbers
Retrieving all registered telephone numbers
(users) in the Fence Control's phone list. A maximum of 5
phone numbers can be stored in the Fence Control.
The rst phone number that appears in the phone list is
always considered the administrator.
When the administrator logs out, it automacally
the second phone number the administrator.
List of all commands and link to operang instrucons
The Fence Control will send you all available commands (without parameter descripon) and the link
to the current operang instrucons.
To Next Page
Loading...
