Gallagher Fence Control - Page 2

GE - Fence Control
- V1.1
2
Device descripon
Measuring connecon for fence voltage
Screw connector for connecon to the electric
fence.
Grounding
Screw terminal for connecon to an earth pin,
for opmum contact with earth.
LED Supply voltage
Flashes when the device is ready for use, the
duraon of the ashing is proporonal to the
power supply voltage (page 4).
Signal strength LED
Flashes when the device is ready for use. The
duraon of the ashing indicates the quality of
the radio signal.
LED Fence voltage
Lights up briey when a high-voltage pulse
from the energizer is recognised.
Power supply for energizer or external
switching output
Power supply for 9V to 12V fence devices
Alternave: Oers the opon of an external
230V network device to be switched on and
o via SMS.
Power supply
6V to 18V DC supply voltage. Can be
connected to the baery of the energizer or to
a mains adapter. If the mains switch power
supply is used, it can also be used to switch
230V energizers on and o via SMS.
Technical data
Product name, Gallagher Fence Control
Mobile radio link, GSM / LTE-M 900/1800 MHz
Rechargeable baery, Li-ion baery / 3.7V / 1200mAh
Power supply, 6V to 18V DC / 15mA
Switching output, 9V to 15V DC / 2A
Measuring voltage range, 500V to 15,000V up to an impact strength of 15 joules
Operang temperature, -20°C to +50°C
Storage temperature, -40 °C to +50 °C
IP protecon class, IP66
Dimensions, 142 x 80 x 30 mm