To Next PageTo Next PageHow to fix a Galletti Air Conditioner that won't turn on?
If your Galletti Air Conditioner fan coil isn't starting, here's what you should check: * First, ensure there's voltage present and inspect the fuse on the board. * Confirm that the mains switch is in the 'ON' position. * Check the room control for any issues. * Examine the fan motor for faults.
What to do if my Galletti FM 22/23 is making noise?
If your Galletti Air Conditioner is producing unusual noise and vibrations, there are a couple of things to inspect. Check for any contact between metal parts, ensuring that all parts are properly secured. Also, tighten any loose screws you find.
Why is my Galletti FM 22/23 not cooling enough?
If your Galletti Air Conditioner isn't providing sufficient output, several factors could be at play. Start by checking the filter for clogs and clean it if necessary. Ensure that nothing is obstructing the airflow around the unit and remove any obstacles. Verify the room air sensor regulation. Finally, confirm that the water source is at the correct temperature.
Detailed description of the FM high wall fan coil units, components and features.
Comprehensive guide for installing the fan coil unit.
Instructions and diagrams for mounting the unit.
Step-by-step instructions for securing the mounting plate to the wall.
Instructions on drilling the correct size hole for condensate drainage with proper slope.
Steps for attaching the indoor unit to the mounting plate and ensuring it's securely fixed.
Procedures for connecting the unit to water and electrical systems.
Proper installation of the drain hose to ensure free drainage and avoid issues.
Details on connecting water inlet/outlet, insulation, and air bleed valve.
Guidelines and procedures for electrical wiring and power supply.
Requirements for power supply, protection devices, voltage variation, and earthing.
Schematic diagram showing electrical connections, abbreviations, and component labels.
Explanation of DIP switch settings for unit configuration, mode, and fan motor.
Procedures for initial startup, including pre-checks, power-on, and air purging.
Essential checks before powering on the unit to ensure correct installation and safety.
Steps to remove air from the hydraulic circuit to ensure proper operation.
Checks for voltage, local codes, grounding, and qualified electricians.
Important safety precautions to follow before, during, and after using the air conditioner.
Procedure for setting 7-day ON/OFF timers for the unit.
How to set timers for slave units when the master unit is in global control mode.
Setup and operation of the master-slave network system.
How the master unit displays errors from slave units, including error code definitions.
Table detailing LED blink codes, reasons, and remedies for various unit errors.
Detailed logic for cooling, heating, fan, and protection modes with thermoelectric valve configuration.
Setup and operation of the master-slave network system.
Procedures for routine maintenance of the unit.
Guide to diagnose and resolve common operational problems.
General| Brand | Galletti |
|---|---|
| Model | FM 22/23 |
| Category | Air Conditioner |
| Language | English |
