Bräunlich GmbH
Am Heideberg 26
D-06886 Lutherstadt Wittenberg
Tel. +49 (0) 3491/6181-0
e-mail: info@loet-shop
www.loet-shop.de
Während der Aufheizphase blinkt die Power-LED. Unterschiedliche Helligkeit heißt unterschiedliche Leistungsstufe.
Error messages
H-E and the soldering iron does not heat means the heating element is defective.
S-E means the sensor or the control unit is defective.
Lötspitzen
knife shape 7,5mm
needle-sharp 0,2mm
chisel form 2,4mm
bevelled 0,8 mm
pencil point 0,5mm
chisel form 3,2mm
bevelled 3mm
chisel form 1.2mm
chisel form 4,6mm
bevelled 5mm
chisel form 1,6mm
chisel form 6,5mm
bevelled 6,4mm
EU declaration of conformity according to Low-Voltage Directive 2014/35/EC
(Nr. 01-20)
The manufacturer/ distributor
Bräunlich GmbH
Am Heideberg 26
06886 Lutherstadt Wittenberg
hereby declares that the following product
Product designation: GALLUNOPTIMAL Soldering iron
Trade name: Trade GALLUNOPTIMAL Sprint65
Model name: GOSprint65
fulfills to the provisions of the Low-Voltage Directive 2014/35/EC - including the changes which applied at the time of
the declaration.
The following harmonised standards have been applied:
"DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the harmonisation of the laws of the Member
States relating to electromagnetic compatibility“.
The following national or international standards (or parts/clauses of them) and specifications were applied:
EN 55014-1:2017
EN 55014-2:2015+A1:2018
EN 61000-3-2:2014
EN 61000-3-3:2013
Place: Lutherstadt Wittenberg
Date: 20.4.2020
______________________________
(Signature) Mr. Tobias Bräunlich, CEO
Menu
Change Temperatur
press +/- short 1°K, long fast change
Temperature compensation
press +/- short 1°K, long fast change (max.+/-50°C/90°F
Temperature unit
press +/- short, °C or °F
Standby
press +/- short, 1=on, 0=off
Soldering Tip
To Previous Page
Loading...