Figure 20
Advanced menu
TM working times menu:
In this menu it’s possible to modify working times of control unit:
T1- Working time motor1
51- Start time slowdown motor1
T2- Working time motor2
52- Start time slowdown motor2
DO-Motors delay opening
DC- Motors delay closing
TL-Electric lock activation menu.
EX-Exits from advanced menu.
Once selected working times to be changed, use up/down to modify it from 0 to 99 seconds. Push
enter to confirm.
To exit without modifications select EH or push together up and down.
5G Single wing mode:
In this menu it’s possible to verify or set if gate works in single wing mode (motor2).Use up/down to
choose yes (YS), not (NT) or exit(EX). Push enter to confirm.
To Next Page
Loading...