Need help?Do you have a question about the GAMDIAS KRATOS M1-750W and is the answer not in the manual?
Confirm the computer system is turned off and all power cables are disconnected before installation.
Illustrates 20+4 Pin and 20 Pin connectors for motherboard power.
Illustrates 4+4 Pin and 4 Pin connectors for CPU power.
Illustrates 6+2 Pin and 6 Pin connectors for PCIE graphics cards.
Shows the SATA power connector for connecting to storage devices.
Shows the Molex power connector for peripherals like fans.
Shows the FDD power connector for floppy disk drives.
Details compatibility with motherboard RGB sync software and header types.
Explains how to switch between motherboard sync and built-in lighting effects.
Plug the AC power cord into the PSU and a wall outlet.
Turn the power switch on the PSU to the 'ON' position.
General| Series | KRATOS |
|---|---|
| Model | M1-750W |
| Type | ATX |
| Wattage | 750W |
| Efficiency Rating | 80 PLUS Bronze |
| Modularity | Non-Modular |
| Input Voltage | 100-240V |
| Input Frequency | 50-60Hz |
| Cooling Fan Size | 120mm |
| RGB | Yes |
| PCIe Connectors | 2 x 6+2-Pin |
| SATA Connectors | 6 |
| Molex Connectors | 2 |
| EPS Connector | 1 x 4+4-Pin |
| Dimensions | 150 x 140 x 86 mm |
| Operating Temperature | 0°C to 40°C |
| Protections | OVP, SCP |
| ATX Connector | 1 x 20+4-pin |
To Next Page
