Need help?Do you have a question about the Gamma Sports Els and is the answer not in the manual?
General| Brand | Gamma Sports |
|---|---|
| Model | Els |
| Category | Stringing Machines |
| Language | English |
Features a 11.0-90.0 lbs tension range for precise string tensioning.
Offers a digital display for setting and viewing tension values.
Features diamond dust coated jaws for secure string grip.
Accommodates all racquets with a quick mount system.
Dual action, rotating metal clamps with diamond dust coating.
Includes a padded tool tray for convenience.
Built with durable and lightweight aluminum materials.
Optional switch for hands-free tension activation.
Instructions for removing a screw used for shipping protection.
Guidance on cleaning and lubricating string clamp posts for optimal performance.
Addresses string slipping in clamps or gripper jaws.
Solutions for string clamp base slipping on the turntable.
Steps to check if the electrical system is not functioning.
How to address string tension being too tight or too loose.
Identifies controls on the front panel like tension switch and display.
Describes back panel components like power switch and receptacles.
Guides on connecting the power cord and adapter for safe operation.
Instructions for connecting the foot pedal switch for operation.
Crucial safety notices regarding indoor use and child supervision.
Adjusts tension settings incrementally and stores them temporarily.
Manages up to nine preset tension memory settings.
Saves tension settings, clears display, or resets string length meter.
Checks racquet count or initiates an internal diagnostic check.
Toggles tension display between pounds and kilograms.
Applies 10% or 20% extra tension for a single pull.
Increases tension by 10% for a single pull, indicated by LED.
Controls the pulling speed of the winder.
Feature is currently not available.
How to adjust clamp jaw gap for proper string grip.
Fine-tuning the locking nut for smooth clamp base operation.
Procedure for removing clamp bases from the turntable.
Steps to check and adjust machine tension using a calibrator.
How to enable or disable the machine's audible buzzer.
Spacing and securing support posts for racquet mounting.
Securing frame support slides against the racquet head.
Adjusting shoulder supports for optimal racquet frame contact.
Details on adjusting shoulder supports for maximum frame contact.
Locking shoulder supports and re-tightening frame supports.
How to insert the awl and use its sheath to guide string.
Guides string through grommets using the awl sheath.
Allows locking the turntable in any position.
Instructions for installing protective pads on shoulder supports.
How to lock and release the string clamp base on the turntable.
Details on dual-action string clamps and pressure adjustment.
Initial steps for threading strings through the frame.
Entering and storing string tension values, including notes on string types.
Procedure for wrapping string and applying tension using the gripper.
Critical safety warning about finger placement during tensioning.
Using switches for tensioning and releasing strings with the gripper.
Securing main strings and tie-off recommendations.
Instructions for weaving cross strings over and under main strings.
Final steps including tying off and removing the frame.
To Next Page