18
STRINGING THE FRAME
Clamping the First Main String
Secure the tensioned main string using the
remaining fi xed clamp. Repeat the procedure
for all of the remaining main strings and tie off
at the appropriate holes following the racquet
manufacturers specifi cations.
This will determine the starting point for the
cross strings. If applicable, tie the fi rst cross
string using an appropriate starting knot.
Weaving the Cross Strings
Weave the cross strings over and under
the main strings being careful to alternate
the weave of each consecutive cross string
to be opposite of the previously installed
cross string.
Completing the String Job
Once the fi nal cross string is tensioned
and clamped, tie off at the appropriate hole
specifi ed by the racquet manufacturer. Re-
move the frame from the Mounting System
by loosening the Shoulder Supports and
Frame Supports.
To Next Page
Loading...
