EasyManua.ls Logo

Gamma M1-S-1 - User Manual

Gamma M1-S-1
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
Semi-automatic Blood Pressure Monitor
Model M1-S-1
INSTRUCTION BOOK
Thank you for choosing our Semi-automatic Blood Pressure
Monitor Gamma
TM
designed on the basis of the most advanced
technologies. The device you are holding now is your reliable as-
sistant. You can measure your blood pressure with this monitor
as accurately and precisely as an experienced doctor or a skilled
nurse would do it.
We are sure that having appraised worthily the high quality
and reliability of this device you will become a regular user of the
products of Gamma Trade Mark.
Before starting to use this device please study the instruction
book carefully. The instruction book oers all information you
need to correctly measure your blood pressure and pulse.
Regular blood pressure control allows for reliable and easy
health monitoring and for eective combating possible compli-
cations caused by blood pressure abnormalities.
ATTENTION
This blood pressure monitor is designed to carry out self-con-
trol over blood pressure but NOT to make self-diagnosis of hy-
pertension/hypotension. Please DO NOT diagnose by yourselves
basing on the measurement results obtained with the blood pres-
sure monitor. Please DO NOT execute self-treatment of high/low
blood pressure and DO NOT change the methods prescribed
without consulting your doctor.

Table of Contents

Questions and Answers

  • A
    anthonydeanAug 11, 2025
    What to do if my Gamma M1-S-1 Blood Pressure Monitor shows ERR 5?
    • M
      mark00Aug 11, 2025
      If your Gamma Blood Pressure Monitor displays ERR 5, it means the device detected an unacceptable difference between your systolic and diastolic pressures. You should take another reading, carefully following all directions. If you continue to get unusual readings, contact your doctor.
  • B
    Beth VargasAug 20, 2025
    Why does my Gamma M1-S-1 show ERR 1?
    • J
      Jonathan HigginsAug 20, 2025
      ERR 1 on your Gamma Blood Pressure Monitor indicates that while the systolic pressure was determined, the cuff pressure dropped below 20 mmHg, preventing diastolic blood pressure measurement. This may occur if the tube loosened after systolic pressure was determined, or if a pulse could not be detected.
  • T
    Tina ChenAug 30, 2025
    What causes ERR 2 on Gamma M1-S-1 Blood Pressure Monitor?
    • J
      john65Aug 31, 2025
      ERR 2 on your Gamma Blood Pressure Monitor indicates that unnatural pressure impulses are influencing the measurement result.

Gamma M1-S-1 Specifications

General IconGeneral
ModelGamma M1-S-1
Measurement MethodOscillometric
Measurement Range (Pressure)0-280 mmHg
Accuracy (Pressure)+/- 3 mmHg
Accuracy (Pulse)+/- 5% of reading
Cuff Size22-32 cm
Memory90 readings
Power Supply4 x AA batteries
DisplayLCD
Automatic Shut-offYes

Related product manuals