Need help?Do you have a question about the Gamma Progression 600 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Mount Type | Table Top |
| Base Type | Tabletop |
| String Compatibility | All |
| Mounting System | 6-Point Mounting System |
To set the stringing tension, loosen the locking knob on the side of the drop weight. Slide the weight in the appropriate direction...
To begin stringing the main strings, thread the two ends of the string through the two center holes at the appropriate end of the frame.
While holding the tension bar slightly above horizontal, wrap the free string clockwise around the gripper drum once and position between the gripper jaw.
While securely holding the string gripper drum with your hand, lift the tension bar above horizontal and gently lower the bar under its own weight.
Clamp the tensioned string to the next adjacent string using the second string clamp. Release the string from the gripper by raising the tension arm.
To Next Page
