Dual Power Input
e power source can be 11-18V DC input, it can be powered up at any place with a 12V car bat-
tery or 100-240V AC input. e power supply is built in and users could connect the AC Power
cord to the main AC socket directly. What ’s more the AC input voltage is 100-240V so that the
users could use charger all over the world and don’t need to worry about any damage caused by
improper input voltage.
Charging Status Monitor
When the charger is working, you can check the charging capacity, battery voltage, charging
time and internal resistance on the screen.
More important, the voltage curve can be displayed on the screen, so you can monitor the
charging status.
Internal Independent Lithium Battery Balancer
A20 Changer employs an individual-cell-voltage balancer. It isn’t necessary to connect an
external balancer for balance charging.
Balancing Individual Cells Battery Discharging
During the process of discharging, Gannet Charger can monitor and balance each cell of the
battery individually. Error message will be indicated and process will be ended automatically if
the voltage of any single one cell is abnormal.
Fast and Storage Mode of Lithium battery
Purposes to charge lithium battery varies, “fast ” charge reduce the duration of charging, whereas
“store” state can control the nal voltage of your battery, so as to store for a long time and protect
useful time of the battery.
Memory Preset
e charger can store up to 10 dierent charge/discharge proles for your convenience. You can
keep the data pertaining to program setting of the battery of continuous charging or discharging.
Users can call out these data at any time without any special program setting.
To Next Page
Loading...
