To Next PageTo Next Page
Need help?Do you have a question about the Garaventa Lift Genesis Series and is the answer not in the manual?
General| Type | Vertical Platform Lift |
|---|---|
| Application | Commercial and residential |
| Travel Height | Up to 14 feet |
| Capacity | 750 lbs |
| Platform Size (W x D) | 36" x 48" |
| Power Supply | 120V AC, 60Hz |
| Compliance | ASME A18.1, CSA B355 |
| Safety Features | emergency stop |
Details on various types of call stations for lift operation.
Essential safety precautions for operating the lift and avoiding hazards.
Step-by-step guide on how to call the platform to the desired landing.
Procedures for safely entering and exiting the lift platform.
Instructions on how to operate the lift controls while on the platform.
Procedures for manual lowering using handwheel and access cap on leadscrew models.
Detailed inspection of leadscrew for wear, noise, and rust issues.
Procedures for inspecting the drive nut for wear and common issues.
Inspecting the safety nut and its associated switch for proper function and wear.
Verifying the slack chain safety device function and electrical cut-out switch.
Testing the safety device and adjusting landing limits for proper operation.
Step-by-step guide for removing the lead screw from the mast.
Steps for installing the new lead screw, including tensioning and greasing.
Detailed steps for replacing the cylinder head and seal, emphasizing cleanliness.
