What to do if my Garden Groom Trimmer doesn't start?
If your Garden Groom Trimmer isn't starting, there are a few potential causes: * The mains plug may not be properly connected to a socket. Ensure the plug is fully inserted. * The collection bin or adapter might not be correctly mounted. Try removing and remounting them. * The fuse for the socket could be deactivated. Check the fuse and reinsert it or switch it back on if necessary.
Why is my Garden Groom Trimmer not collecting cuttings?
If your Garden Groom Trimmer isn't collecting cuttings, it might be due to the following reasons: 1. The collecting bin is full. Disconnect the mains plug and empty the bin. 2. The hose of the collection bag is blocked. Disconnect the mains plug and remove any cuttings from the hose. 3. The adapter ejection chute is blocked. Disconnect the mains plug and clear any cuttings from the chute end.
Explains symbols used in the manual for safety and recommendations.
Covers proper use, improper use, residual risks, and workplace safety.
Lists product contents, device overview, and warranty conditions.
Covers prior use checks and assembly.
Details mounting the collecting bin and operating the hedge trimmer.
Provides solutions for common problems, technical data, and warranty statement.
General| Blade type | Double blade |
|---|---|
| Product color | Green, Grey |
| Bag included | Yes |
| Engine power | 300 W |
| Power source | AC |
| AC input voltage | 120-230 V |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Depth | 308 mm |
|---|---|
| Width | 643 mm |
| Height | 282 mm |
| Weight | 2700 g |
To Next Page
