Need help?Do you have a question about the Gardena 19500 AquaSensor and is the answer not in the manual?
General| Article No. | 19500 |
|---|---|
| Max. immersion depth | 7 m |
| Max. liquid temperature | 35 °C |
| Protection class | IP X8 |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Cable length | 10 m |
Essential safety guidelines, electrical precautions, and operating practices.
Rules for safe use, including temperature limits and bystander safety.
Explains thermal protection and the pump's automatic venting feature.
Covers electromagnetic field effects on medical implants and cable safety.
Addresses risks like suffocation from small parts and polybags.
Instructions for removing the handle lock before initial use.
Details on connecting different hose diameters to the connection nipple.
Steps to securely connect the hose to the pump's elbow connector.
Guidance on immersing the pump, connecting power, and initial operation.
How the pump automatically switches on/off based on water levels.
Procedure to set custom switch-on/off heights for automatic mode.
Special function for clearing very low water levels.
Method to check the current switch-on/off height settings.
How to deactivate the automatic LED water level display.
Activating a demonstration mode for pump functions.
Running the pump continuously until manually stopped.
Operating the pump for a fixed duration before automatic shut-off.
How to switch between clear and dirty water operating modes.
Steps to extend the pump's pedestal for dirty water operation.
Steps to retract the pump's pedestal for clear water operation.
Instructions for cleaning the pump's exterior surfaces.
Procedure for flushing the pump after use with specific liquids.
Guidance on cleaning the pump's main operating button if it becomes stuck.
Guidelines for safe and proper storage of the pump.
Information on environmentally responsible disposal of the product.
Steps to clean pump components when the pedestal is difficult to move.
To Next Page