Need help?Do you have a question about the GardenCare GCMT262 and is the answer not in the manual?
Instructions for safely handling flammable fuel mixture for the multi-tool.
Checks and preparations required before using the multi-tool.
Procedures to ensure safe engine starting.
Guidelines for minimizing noise disturbance during operation.
Instructions for attaching the guard to the brush cutter.
Instructions for fitting the nylon cutting head.
Guidance on selecting the appropriate cutting attachment for the task.
Techniques for using the cutting line head effectively.
Steps for connecting the pruning attachment to the drive shaft.
Steps to connect the hedge trimmer gearbox to the drive shaft.
How to adjust the cutting blade angle for optimal performance.
Important notes regarding hedge trimmer blades.
Detailed information on the correct fuel mixture and its properties.
Recommendations for storing two-stroke fuel to maintain quality.
Step-by-step guide on how to refuel the multi-tool safely.
Procedures for starting the engine from cold.
Instructions on how to clean or replace the fuel filter.
This document is an owner's manual for a Gardencare multi-tool, model GCMT262. It provides detailed instructions for assembly, operation, and maintenance of the device and its various attachments.
The Gardencare GCMT262 is a versatile multi-tool powered by an air-cooled 2-stroke petrol engine (IE34F-2E) with a displacement of 25.4 cm³. It is designed for various outdoor tasks through interchangeable attachments, including a brush cutter, pruner, and hedge trimmer. The engine's maximum output is 0.7 kW (ISO 8893), with an idle speed of 2800±150 rpm and a maximum power speed of 9800 rpm. Fuel is a 40:1 petrol to oil mixture, stored in a 0.65L tank. The transmission utilizes a centrifugal clutch, spur gear, and cam-crank mechanism.
When configured as a brush cutter with an extension shaft, the dry weight without harness and gasoline is 6.2 kg. Its overall size is 1800mm x 380mm x 250mm. The reduction ratio is 22:17. It supports two cutting devices: a 3-tooth blade (255mm cutting width, 1.4mm thickness) and a nylon head (415mm cutting width, 2.4m line diameter). The maximum blade rotation speed is 7500 rpm, rotating counter-clockwise (as seen from above). The brush cutter is suitable for eliminating tall grass, non-woody vegetation, brushwood, and small shrubs up to 2 cm in diameter. It features a safety guard and requires careful installation of either the nylon head or the 3-tooth blade, ensuring secure locking and proper positioning to prevent damage or injury.
When used as a pruner saw with an extension shaft, the dry weight without shoulder strap and gasoline is 5.8 kg. Its overall size is 2100mm x 230mm x 250mm. The reduction ratio is 0.94. The cutting head includes a 12-inch (300mm) guide bar and a saw chain with a pitch x gauge of 3/8 x 0.042 inches (9.53 x 1.07mm). It uses a plunger-type oil pump and a 7T sprocket. The pruner is designed for cutting branches and requires careful assembly of the guide bar and saw chain, ensuring correct chain direction and tension. Kickback and pinching are important safety considerations, requiring a firm grip and high engine speeds during operation.
When used as a long-reach hedge trimmer with an extension shaft, the dry weight without shoulder strap and gasoline is 7.1 kg. Its overall size is 2300mm x 230mm x 250mm. The reduction ratio is 4:1. The cutting head features a reciprocating double blade with 28 teeth, a pitch of 30mm, and an effective cut width of 16 inches (400mm). The angle of the cutting blades can be adjusted up to 90° (±45° from the cutting head position aligned with the shaft). This attachment is suitable for cutting fresh growth (green branches) up to approximately 10mm thick.
The manual emphasizes safety, requiring users to wear protective equipment (goggles, helmet, ear defenders, security shoes, and gloves) and maintain a safe distance from moving and cutting parts. Fuel handling requires caution due to flammability, advising refuelling outdoors and away from sparks or flames. The multi-tool should be operated with a firm, two-handed grip and a steady posture. Starting the engine involves a cold start procedure (air purge bulb, choke lever to closed, ignition to START) and a hot start procedure (ignition to START). The engine should be allowed to warm up, and full throttle should be used for cutting. When transporting, the engine must be off, and the pruner's scabbard should be in place.
Regular maintenance is crucial for the device's longevity and safe operation.
The manual also includes a detailed maintenance schedule outlining checks and procedures for various components at different operating hour intervals (before use, every 25, 50, and 100 hours). The warranty covers faulty materials and workmanship for 1 year for home owners and 3 months for commercial use, but excludes failures due to insufficient maintenance, incorrect fuel mixture, abnormal use, accidental damage, incorrect assembly, or wear parts.
General| Brand | GardenCare |
|---|---|
| Model | GCMT262 |
| Category | Power Tool |
| Language | English |
To Next Page