Gardener's supply company SunLite User Manual

SunLite® Tabletop Garden
Assembly Instructions
T
here are four parts to assembling the
SunLite Garden: Frame Assembly
, Ball
Chain Assembly, Adjusting the Fixtures, and
Installing the Light Tubes. With the help of
one other person, you can assemble the SunLite
Tabletop Garden in less than an hour. The only
tools you’ll need are a Phillips screwdriver, a
hammer or rubber mallet, and pliers.
Frame Assembly
Step 1. Lay out all Frame Parts on a flat, clean
surface.
Step 2. Connect an A4 Side Base Frame to the
end of each A2 Bar using two Phillips-head bolts
(Fig 2). Repeat this step to connect the second A4
Side Base Frame to the other end of the A2 Bars.
Do not fully tighten the bolts on the frame until
Step 4.
Step 3. Connect the A1 Side Frames to the A4
Side Base Frames by placing a Phillips-head bolt
up through the hole in the underside of the A4
Frame. Make sure the nylon cleat on each A1 Side
Frame is facing out (Fig. 2).
A2 Bar
Light Fixture
A4
Side
Base
Frame
A1 Side Frame
with Cleat
Fig. 1
Enlarged
view of
cleat
A1
Side
Frame
A2
Bars
A4 Side
Base Frame
Fig. 2
Parts List
Qty.
Frame A1 Side Frames 2
Parts: A2 Bars 2
A3 Pulley Bars 1
A4 Side Base Frames 2
Additional Light Fixtures 1
Parts: T-8 Light Tubes 3
Poly Tray 1
Hardware: Ball Chains 2
Chain Connectors 4
Split Rings,Large 2
Split Rings,Small 2
Bolts 8
End Plugs 6
Bolt
Bolts

Gardener's supply company SunLite Specifications

General

Brand	Gardener's supply company
Model	SunLite
Category	Lawn and Garden Equipment
Language	English

Summary

Product Overview and Parts

Parts List

Lists frame parts, additional components, and hardware required for assembly.

Assembly Overview

Outlines the four main assembly stages and required tools for the SunLite Garden.

Frame Assembly

Connecting Base Frames

Connects A4 Side Base Frames to A2 Bars using bolts, forming the base.

Attaching Side Frames

Attaches A1 Side Frames to the A4 Side Base Frames using bolts.

Ball Chain and Fixture Assembly

Ball Chain Setup

Attaches chain connectors and split rings to the ball chains.

Threading and Securing Chains

Threads ball chains through guide holes and over pulleys, then attaches to fixture.

Adjusting and Using Fixtures

Fixture Height Adjustment

Details how to adjust fixture height using the ball chain and cleat.

Light Tube Installation

Describes inserting and locking fluorescent light tubes into sockets.

Growing and Care Guidelines

Light Intensity and Plant Needs

Discusses optimal light distance for various plant types.

Plant Rest Periods

Explains the importance of darkness for plant respiration and growth.

Water and Humidity Management

Provides guidance on watering frequency and creating humidity.

Maintenance and Ordering

Light Tube Maintenance

Covers cleaning and replacement of light tubes for optimal output.

Care Instructions

Details cleaning procedures for the garden frame and light tubes.

Ordering Information

Lists available products, accessories, and contact details for purchasing.