Gardenia WLBC520 - Specifications; Technical Specifications

40
1. Brush off any dirt from the machine, check for any damaged parts, and if you
find any damage ensure a full repair before the next use.
2. Extract fuel from the tank, and loosen the drain screw of the float cabin to
extract fuel, turn on the engine, and leave it running until it stops naturally.
3. Remove the spark plug and put in 1~2cc of 2~cycle oil in the engine. Draw the
starter rope 2~3 times, set the plug back, and stops it at the contraction
position.
4. Apply anti-rust oil to the metal parts such as the throttle wire, put the cover on
the blade, and keep it indoors avoiding dampness.
9. SPECIFICATION
Name/Type
Specification
Brush cutter
WLBC520
Handle Type
U-type
Power Transmission Method
Automatic centrifugal clutch, spiral gear
Applied Blade
3T
Blade Rotation Direction
Counter clockwise(from operator’s view)
Outward Size(L*W*H)(cm)
98×28.5×（32/10）
Weight(kg)
7.0
Engine
Manufacturer
China
Type
Single cylinder air cooling 2-cycle gasoline engine
Displacement
volume(cc)
51.7
Carburetor
Piston valve
Starting Method
Recoil starter
Stopping Method
Sparking Circuit Primary Short
Fuel Used
Lubricating oil mixed gasoline(mixing rate 25:1)
Lubricating Oil Used
2-cycle engine oil
Fuel tank capacity(L)
1.2