GARDINER TECHNOLOGY Gardtec 500 series User Manual

Gardiner Technology
Gardtec 500 Series User Manual
Operating Gardtec 500
To alleviate any possibility of error , always insert 0 (zero) in front of a user code entry.
0 (zero) should not be used as part of a user code.
Function Action Result Display
To Set System
Enter User Code Exit sounder commences
continuous tone during exit
time
1
st
2
nd
To Unset System
a) Enter premises via entry
route
b) Enter User Code
Entry sounder starts
intermittant tone
Entry sounder s ilences
-
U
Isolating Zones
(ie night set or garage set)
NB :- After u nsetting the
system after zone omits
the display will identify the
zones omitted during the
last setting
Enter User Code followed
by *
and zone number .
(for multiple zone omits
enter code - * zone no *
zone no etc)
Exit sound starts
continuous tone for
duration of exit time
1
st
2
nd
Changing the User Code
NB: - R emember not to use
a 0 (zero) as part of a code
a) Enter the user code
b) Enter *9 followed by the
new code
c) Press 0 (zero) to clear
display
a) Exit sounder starts
b) Sounder silences and
display shows the new
code in sequence followed
by U
c) Panel returns to unset
U
?
?
?
?
U
U
Chime Function
(for walk testing detector s
or identifying area
movement)
To remove chime function
press 0 (zero)
Enter 0 # 6
Movement through any
detector while system is
unset creates a 2 second
tone
U
Sounder Test
Enter 0 # 9
External sounder & strobe
will sound for 10 seconds
follwed by internal sounder
for 10 seconds
U
To Read Event Log
(last 13 events)
Enter 0 # 8
Display will scroll through
last 13 even ts of activation
1 2 3 4 5 - - - - 13
?
?
?
?
To Clear Display
If the display scrolls
between U (unset) and any
zone information press 0
(zero) to clear after
investigating cause of
activation)
U
Quick Set Option
Enter 0 # 4
Normal set procedure
MCM Alarms – The Old Dairy – 77 Robinson Road – Rushden – Northamptonshire – NN1 0 0EH
Tel:
-
0870 749 0263
–
Fax:
-
0870 749 0264
–
Email
support@mcmalarms.co.uk
–
Web:
-
www.mcmalarms.co.uk
U
-
h
-

GARDINER TECHNOLOGY Gardtec 500 series Specifications

General

Brand	GARDINER TECHNOLOGY
Model	Gardtec 500 series
Category	Power Supply
Language	English

Summary

Gardtec 500 Operation

To Set System

Enter User Code to commence exit sounder during exit time.

To Unset System

Enter premises via entry route, then user code to silence entry sounder.

Isolating Zones

Enter user code, *, and zone number for zone isolation.

Changing the User Code

Enter current code, *9, new code, then 0 to clear display.

Chime Function

Enter 0 # 6 for chime; press 0 to remove chime function.

Sounder Test

Enter 0 # 9 for sounder and strobe test.

To Read Event Log

Enter 0 # 8 to view last 13 activation events.

To Clear Display

Press 0 (zero) to clear display after investigating activation cause.

Quick Set Option

Enter 0 # 4 for normal set procedure.