Need help?Do you have a question about the Gardner Denver LRS15-22C and is the answer not in the manual?
General| Brand | Gardner Denver |
|---|---|
| Model | LRS15-22C |
| Category | Control Systems |
| Language | English |
Explains the function of the three control keys and their dual operational uses on the GD Pilot.
Details the three-row display and the red/green light signals for status, warnings, and faults on the GD Pilot.
Guides users on navigating menus to display and modify various settings and parameters on the GD Pilot.
Guides on setting the CUT-OUT POINT and TARGET PRESSURE for compressor operation and speed control.
Steps and safety precautions for initiating the compressor unit's operation via the GD Pilot.
Details the purpose and correct usage of the emergency stop button for immediate unit shutdown.
Explains the procedure for safely shutting down the compressor unit using the GD Pilot's soft-stop function.
Guides on how to acknowledge warning and fault messages displayed on the GD Pilot and the associated indicators.
Describes how to access and interpret the fault memory to diagnose issues with the compressor.
Outlines the process for replacing the GD Pilot unit, including setup code entry and initial configuration.
Essential safety precautions to be observed during operation and maintenance to prevent hazards.
Details how fault messages are displayed, their immediate impact on operation, and acknowledgment procedures.
A comprehensive table listing potential faults and warnings, their causes, and recommended remedies.
To Next Page