To Next PageTo Next Page
Need help?Do you have a question about the Gardol 85SB and is the answer not in the manual?
General| Brand | Gardol |
|---|---|
| Model | 85SB |
| Category | Snow Blower |
| Language | English |
Learn controls, proper use, and quick stopping procedures for the equipment.
Inspect area, remove debris, check fuel, and ensure proper attire before use.
Guidelines for safe operation, including clearing slopes and avoiding hazards.
Procedures for regular maintenance, checks, and proper storage.
Raise handle to operating position, tighten knobs, and install securely.
Reduce tire pressure to the specified range for optimal performance.
Procedures for safely stopping the traction drive, auger, and engine.
Warnings about rotating parts, clogged chute, and safe operation.
Use levers to control chute position and deflector for snow direction and distance.
Use the auger control lever to engage and disengage the auger for throwing snow.
Ensure engine is off, key removed, parts stopped, and plug wire disconnected.
Use levers to control self-propelling movement, speed, and direction.
Check and add oil if necessary before starting the engine.
Fill fuel tank with fresh gasoline, ensuring it's clean and unleaded.
Steps for starting engine with electric starter when cold.
Steps for starting engine with recoil starter when cold.
Keep housing clean, remove key, disconnect plug wire, and avoid using a garden hose.
Follow safety warnings and detailed steps for belt replacement.
Clean, inspect belts, lubricate, check fasteners, and touch up paint before storage.
Drain fuel system, change engine oil, and prepare cylinder.
